Applicable to:
RoboVac 11S, RoboVac 30C, RoboVac 25C, RoboVac 15T, RoboVac 35C, RoboVac G20, RoboVac G20 Hybrid, RoboVac G40 Hybrid+, RoboVac G35+, RoboVac G10 Hybrid, RoboVac G30 Verge, RoboVac G30 Hybrid
We usually don't recommend our customers to disassemble the RoboVac. However, sometimes some debris might get into the suction fans, causing suction fan alerts or loud noise.
You can try this at first:
- With the dust collector removed from the unit, hold the vacuum upright with the bumper facing up, the suction "hole" facing downwards. Shake out any debris that might be stuck in the suction fans inside the machine.
If the debris cannot be shaken out, you can try disassembling the vacuum to clean the suction fans from the internal. While it might look a little difficult seeing it for the first time, it is much easier than expected. You can have a look at the video links below to see if you could disassemble it.
How to Disassemble and Assemble RoboVac's Fan Motor (for 11S series)
How to Disassemble and Assemble RoboVac's Fan Motor (for Max series and G series)
If you still need further assistance, please contact us.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article