* This article is only suitable for X8/X8 Hybrid, if your RoboVac is another WiFi compatible model, please refer to the How to connect RoboVac to WiFi (For iOS)?
Preparations:
- Download and install the eufy app on your phone.
- Ensure that the Location Services and Bluetooth on your iPhone are turned on.
- Ensure that your phone is connected to 2.4 GHz WiFi (Eufy RoboVacs can connect to 2.4 GHz WiFi only, and it does not support 5 GHz WiFi), and please make sure you know the WiFi password because it will be required during the setup process.
- Take both the RoboVac and your phone near to the router.
- Power on the RoboVac X8/X8 Hybrid and ensure that the WiFi light is flashing slowly. If not, please reset the WiFi by holdingand simultaneously for 5 seconds until you hear a voice prompt.
1. Choose X8. Log in to the eufy app, tap on Add Device -> Robotic Vacuums -> X8. Please “Allow location service” if it asks to grant permission to access location.
2. Enable Bluetooth on your phone. The eufy app requires a Bluetooth connection to set up RoboVac X8/X8 Hybrid, please enable Bluetooth in the Control Center and also allow Bluetooth for eufy Clean app.
3. Connecting the RoboVac to WiFi. After enabling Bluetooth, the eufy app will automatically discover RoboVac X8/X8 Hybrid, tap on the "+" icon, and enter your WiFi password in and wait for connecting. Make sure you enter the correct WiFi password. Please note the password is also case sensitive.
4. After it successfully connects, you can give your X8 a lovely name. Congratulations! You are all set up.
If you need any further assistance, please contact us.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article