Appplicable to:
SoloCam S340, eufy SoloCam E30
If the camera is blocked, install the solar panel independently and use the provided USB-C extension cable to get strong solar power. The camera can be mounted on a wall or on the ceiling.
1. Drill holes with a 15/64 inch (5.95 mm) drill bit with the provided positioning card, then insert the anchors into the holes.
2. Connect the solar panel to the camera using the provided USB-C extension cable.
3. Firmly secure the camera onto the mounting bracket.
?Be careful not to install by mistake.
4. Install the mounting bracket of the solar panel in a suitable position.
5. Install the solar panel onto its mounting bracket by turning it, then adjust the angle (20º~30º recommended).
6. Check the solar charging dashboard on the App
If you have any other questions about the SoloCam S340/E30, please don't hesitate to reach out to us for further assistance.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article