Compatible with:
SoloCam C210, 5-Piece Home Alarm Kit, Motion Sensor, Entry Sensor, Keypad, eufyCam 2 Pro, eufyCam 2C Pro, eufyCam 2, eufyCam 2C, eufyCam Solar Panel, eufyCam, SoloCam E40, SoloCam L40, SoloCam S230, Floodlight Cam 1080p, Floodlight Cam E 2K, Floodlight Cam 2 Pro, Smart Lock C100, Smart Lock E130, Smart Lock S230, Video Doorbell 2K (Battery-Powered), eufy Security Video Doorbell 1080p (Battery-Powered), Video Doorbell 2K (Wired), Video Doorbell Dual 2K (Battery-Powered), Indoor Cam 2K (Solo IndoorCam C24), Indoor Cam 2K Pan & Tilt (Solo IndoorCam P24), Outdoor Cam Pro (Solo OutdoorCam C24), Indoor Cam Mini 2K, S220 SoloCam, S100 Wall Light Cam, Solar Wall Light Cam S120, Smart Lock C210, Video Smart Lock E330, Video Doorbell E340
The eufy App will auto-update the devices’ status when you first open the App. This article applies to all eufy security devices using eufySecurity App.
Check Your Firmware Version
You can check the firmware version of your security device on the App under the page “About Device”.
Steps in App: Device Tab>... icon> Gear icon> Settings> General> About Device > System Version.
Update Your Firmware Version
Normally, when the eufy security device has network access (is connected to Wifi), it will upgrade the firmware automatically in the wee hours.
If the automatic update fails, please just wait another 24 hours. It will update again in 24 hours. You can use the current version. Don’t worry.
You can also manually update the devices’ software as well in the “About Device” page and check for firmware/check for firmware update. It will tell you if the firmware is up to date or not.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article