For RoboVacs that work with boundary strips (Which RoboVacs work with boundary strips ), you can apply the boundary strips on flat surfaces to block off your RoboVac.
The boundary strips need to be taped down. They come with double-sided tapes.
Below are recommended steps:
1. Measure the length of the strip you might need.
2. Cut the boundary strip vertically.
3. Stick the 3M adhesive tape on the boundary strip.
4. Apply the strip on the hard and flat floor. The side with the "eufy" logo should face upward.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article