Parkmate CMD-12N - Mounting

Butterfly mount:

1. Select a flat and centered location near the number plate lamp at the rear of the vehicle to mount the camera.
2. Attach the 3M tape to the bracket of the camera and drill a small hole for the first screw.
3. Use a screwdriver to fix the first screw, but don't tighten it yet.
4. Insert camera wire through newly drilled hole and mount securely in place.
5. Mark the position suitable for the seconds screw and drill a small hole for it.
6. Fix the seconds screws and tighten both screws.

Flush mount:

1. Unscrew the upper part of the camera anticlockwise, detach the upper part and bracket and place the bumper adaptor instead.
2. Mark the middle position of rear bumper and drill a hole with the provided 16.5mm hole saw.
3. Adjust the camera to turn the UP arrow straight up-wards.
4. Pull the camera lead through the bumper hole before fixing the camera.
5. Put the camera into the hole and use both your thumbs to press it evenly to ensure tight and flat mounting.