Parkmate Monitor/Smart Mirrors - How do I adjust the screen shutoff settings?

See the guide below to learn how to reach the settings in adjusting the length of which it takes the mirror screen to shutoff.

MCPK-502DVR:

1. Go into the system settings from the home page.
2. Select the tab "Auto LCD off"
3. Adjust the settings between 10 seconds / 15 seconds / 30 seconds / 1 minute.
4. Leave settings to confirm.

MCPK-972DVR:

1. Enter settings by selecting the gear button.
2. Touch the "Auto display off" button.
3. Touch sequentially to toggle between 5 seconds / 10 seconds / off.
4. To save selection, leave the settings page.

PM-72W:

1. Open settings by pressing on the gear button on the main page.
2. Click on the "Auto LCD Off" button.
3. Select your preference between 1 minute / 5 minutes / Always on.
4. Leave the page to confirm selection.

RVK-43SW:

1. Go into the device settings.
2. Press on the red button that says "setup".
3. Press on the "Time out" button.
4. Select between 30 seconds / 45 seconds / 1 minute.
5. Press the power/ok button to confirm.