Differences between Cleaning Modes of RoboVac (Bounce Series)

Applicable to:

RoboVac 11S, RoboVac 30C, RoboVac 15T, RoboVac 35C, RoboVac 25C

The Bounce Robovac has 4 cleaning modes: Auto, Spot, Edge, and Single Room. 

• Auto or Single Room modes

1. RoboVac will follow a random path when cleaning. The RoboVac will try to return to the charging base when it runs out of power under Auto mode. The default suction is Standard suction. 
2. RoboVac will stop cleaning after 30 minutes under the Single Room mode. Select this mode only when one specific room needs to be cleaned. Make sure to confine RoboVac to the room by closing the door.

• Spot cleaning mode

RoboVac intensively cleans a specific area in a spiral pattern, useful if there is a concentrated area of dust or debris. The default suction is Max suction. RoboVac will stop cleaning after 2 minutes.

• Edge cleaning mode

RoboVac reduces its speed when it detects a wall and then follows the wall to ensure the edge is cleaned thoroughly. The default suction is Max suction. RoboVac will clean for 20 minutes and return to the charging base.

If you have other concerns, please contact us.