What should I do if my WetVac W31 does not have any suction power?

If the WetVac does not have any suction power to pick up debris or liquid on the floor, please follow the troubleshooting tips below:

1. Confirm whether the filter sponge bracket is correctly installed in place.

2. Remove the rolling brush.
3. Pinch the rolling brush (semi-circle on the left) fixing bracket and lift it up to remove the rolling brush.
4. Check whether the suction inlet is blocked by debris. If yes, you can use the cleaning tool to remove the debris from the suction inlet.

If the issue persists, please contact us with videos showing the issue for further assistance.