Setting Up Your eufy Smart Lock Touch E130 in eufy App

This article is designed to help you set up your Smart Lock Touch in the eufy app. For hardware installation, please download the Quick Start Guide for the Smart Lock Touch from our help center.

Download the App

Download the eufy app from the App Store (iOS devices) or Google Play (Android devices). You can also visit eufylife.com on your mobile device.

Create Your Account

After downloading the app, create or Log in to your account. 

Add Smart Lock Touch to the App

1. In the Device tab, tap Add Device then select Smart Lock Touch.

2. Scan the QR Code located on the battery compartment or manually input the device’s serial number.

3. Watch the installation guide to finish the hardware installation. When finished, tap “I have finished the installation” to continue the setup process in the app.

4. Long press the Setup button until you hear a beep. After you release it you will hear a voice prompt. Click “I heard the voice prompt” and tap Next so that the phone will connect to the smart lock via Bluetooth.

5. Close the door and calibrate the lock. Tap “I have closed the door” and click “Calibrate the Lock” for calibration.

6. Create a name for your eufy Smart Lock Touch.

7. Click Next and set your passcode.

8. Click Next and add your Fingerprint to the smart lock. Tap “Start Enrollment” for a quick start. Press and hold your finger on the fingerprint sensor and scan it eight times to finish the fingerprint enrollment.

9. eufy Smart Lock Touch will be successfully added to your eufy app.

You’re all set! If you still need help setting up eufy Smart Lock Touch, please contact us for further assistance.