Smart Connect Function Description of BBM 2.0 Generation

Modified on Wed, 10 Dec at 11:20 AM

Applicable to:

Baby Monitor 2, eufy Baby Monitor E21How Smart Connect Works

Firstly, the WiFi switch on the cam body needs to be turned on to enable the smart connect function;
The smart connect function will prioritize selecting the path with the best connection status between WiFi and local connections, without the need for manual switching;
When the WiFi signal does not support stable screen streaming, and when the current wireless environment interference is detected, there will be a pop-up prompt to manually switch to pure local connection, and the APP will not stream at this time;
Pure local connection manual exit method, click the power button on the screen to turn off the screen for 10 seconds (when entering pure local connection mode, you can also view the exit method on the smart connect interface in the settings);
If you need to turn off the smart connect function, you can manually turn off the WiFi switch on the cam body. The connection method will be fixed as a local connection, and the APP will not output data.

List of Connection Methods

Number	Smart Connect Interface	Connection Status	Cam WiFi Switch Status	Signal Situation	Screen Outflow Status	APP Outflow Status
1		Wi-Fi	Turn on	The WiFi signal between the camera and the screen is good and stable	Outflow	Outflow
2		Local	Turn on	Poor or unstable WiFi signal between cam and screen	Outflow	Outflow
3		Local	Turn on/off	Cam wifi disconnected	Outflow	No Outflow
4		Pure local	Turn on	Cam and screen wifi signal disconnected	Outflow	No Outflow
5		No Connection	Turn on/off	Cam and screen disconnected	No Outflow	If the cam wifi switch is turned off, the app will not stream; If the cam wifi switch is turned on and the cam wifi connection is stable, the app will be streaming;

If you have any other questions about the eufy BBM 2.0, please don't hesitate to contact us for further assistance.