The device is equipped with a temperature calibration feature. In general, our probes maintain accuracy and seldom require recalibration. However, if you suspect a temperature discrepancy, you can recalibrate using the following steps:
1. Create ice cubes in the refrigerator using distilled or purified water.
2. Fill an insulated cup with the ice cubes and add a suitable amount of water—enough to cover the ice without excess.
3. Turn on the device, immerse the probe into the ice water, and stir continuously for 1 minute.
4. Wait for the temperature reading to stabilize. Calibration is unnecessary if the temperature is within the range of -0.3 °C to 0.3 °C. If the temperature falls outside the range of -2 °C to 2 °C, recalibration is not possible.
5. Simultaneously press and hold the °C/°F button and the LOCK button for 5 seconds. The display will flash ""CAL,"" indicating calibration mode. Upon completion, the display will flash ""Suc."" If ""Err"" appears on the screen, repeat the calibration process.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article