How do I turn my sensors off / on?

Manually turning off your Playermaker 2.0 sensors is not required. Simply, it is an optional way to preserve the battery life of your sensors. 

NOTE: Do not turn off your sensors while you are performing an activity, as this action will result in your session data being permanently deleted.

How to turn off your sensor:

1. Remove your sensor from the Playermaker 2.0 case.
2. Identify the button on your sensor. 
3. Use a pin to press and hold the sensor button for 7 seconds.
4. Your sensor is now off and shouldn't show any light.
5. Place your sensor back inside the case for safekeeping.

How to turn on your sensor(s):

1. Remove your sensor from the Playermaker 2.0 case.
2. Identify the button on your sensor. 
3. Use a pin to press the sensor button once.
4. Your sensor is now on and should show a light.
5. Next, immediately place your sensor(s) back inside the case. This allows the sensor(s) to return to rest mode prior to conducting your next session.
6. Your sensor's battery life will show the same percentage as it showed prior to being turned off.